linux应急响应检测脚本

1,341次阅读

共计 16966 个字符，预计需要花费 43 分钟才能阅读完成。

挖矿病毒检测

#!/bin/bash
echo "Linux 安全检查与应急响应工具"
echo "Version:1.3"
echo "Author:Daily"
echo "Date:2020-11-11"
 
dos2unix buying.sh
date=$(date +%Y%m%d-%H%M%S)
 
ipadd=$(ifconfig -a | grep -w inet | grep -v 127.0.0.1 | awk 'NR==1{print $2}')
 
check_file="/tmp/buying_${ipadd}_${date}/check_file/"
danger_file="/tmp/buying_${ipadd}_${date}/danger_file.txt"
log_file="/tmp/buying_${ipadd}_${date}/log/"
rm -rf $check_file
rm -rf $danger_file
rm -rf log_file
mkdir /tmp/buying_${ipadd}_${date}/
echo "检查发现危险项, 请注意:" > ${danger_file}
mkdir $check_file
echo "" >> $danger_file
mkdir $log_file
cd $check_file
 
if [ $(whoami) != "root" ];then
    echo "安全检查必须使用 root 账号, 否则某些项无法检查"
    exit 1
fi
 
 
saveresult="tee -a checkresult.txt"
echo "[0.1] 正在检查 IP 地址....." && "$saveresult" 
 
echo -------------0.IP 及版本 -------------------
echo -------------0.1IP 地址 -------------------
echo "[0.1] 正在检查 IP 地址....." | $saveresult
ip=$(ifconfig -a | grep -w inet | awk '{print $2}')
if [ -n "$ip" ];then
    (echo "[*] 本机 IP 地址信息:" && echo "$ip")  | $saveresult
else
    echo "[!!!] 本机未配置 IP 地址" | $saveresult
fi
printf "\n" | $saveresult
 
 
 
echo ------------12 历史命令 --------------------------
echo ------------12.1 系统操作历史命令 ---------------
echo ------------12.1.1 系统操作历史命令 ---------------
echo "[12.1.1] 正在检查操作系统历史命令....." | $saveresult
history=$(more /root/.bash_history)
if [ -n "$history" ];then
    (echo "[*] 操作系统历史命令如下:" && echo "$history") | $saveresult
else
    echo "[!!!] 未发现历史命令, 请检查是否记录及已被清除" | $saveresult
fi
printf "\n" | $saveresult
 
 
echo ------------2. 网络连接 ---------------------
echo "[2.1] 正在检查网络连接情况....." | $saveresult
netstat=$(netstat -anlp | grep ESTABLISHED)
netstatnum=$(netstat -n | awk '/^tcp/ {++S[$NF]} END {for(a in S) print a, S[a]}')
if [ -n "$netstat" ];then
    (echo "[*] 网络连接情况:" && echo "$netstat") | $saveresult
    if [ -n "$netstatnum" ];then
        (echo "[*] 各个状态的数量如下:" && echo "$netstatnum") | $saveresult
    fi
else
    echo "[*] 未发现网络连接" | $saveresult
fi
printf "\n" | $saveresult
 
 
echo ------------20.2CPU 分析 -----------------
echo ------------20.2.1CPU 情况 -----------------
echo "[20.2.1] 正在检查 CPU 相关信息....." | $saveresult
(echo "CPU 硬件信息如下:" && more /proc/cpuinfo) | $saveresult
(echo "CPU 使用情况如下:" && ps -aux | sort -nr -k 3 | awk  '{print $1,$2,$3,$NF}') | $saveresult
printf "\n" | $saveresult
echo ------------20.2.2 占用 CPU 前 5 进程 -----------------
echo "[20.2.2] 正在检查占用 CPU 前 5 资源的进程....." | $saveresult
(echo "占用 CPU 资源前 5 进程：" && ps -aux | sort -nr -k 3 | head -5)  | $saveresult
printf "\n" | $saveresult
echo ------------20.2.3 占用 CPU 较大进程 -----------------
echo "[20.2.3] 正在检查占用 CPU 较大的进程....." | $saveresult
pscpu=$(ps -aux | sort -nr -k 3 | head -5 | awk '{if($3>=20) print $0}')
if [ -n "$pscpu" ];then
    echo "[!!!] 以下进程占用的 CPU 超过 20%:" && echo "UID         PID   PPID  C STIME TTY          TIME CMD"
    echo "$pscpu" | tee -a 20.2.3_pscpu.txt | tee -a $danger_file | $saveresult
else
    echo "[*] 未发现进程占用资源超过 20%" | $saveresult
fi
printf "\n" | $saveresult
 
 
echo ------------7. 进程分析 --------------------
echo ------------7.1 系统进程 --------------------
echo "[7.1] 正在检查进程....." | $saveresult
ps=$(ps -aux)
if [ -n "$ps" ];then
    (echo "[*] 系统进程如下:" && echo "$ps") | $saveresult
else
    echo "[*] 未发现系统进程" | $saveresult
fi
printf "\n" | $saveresult
 
echo "[7.2] 正在检查守护进程....." | $saveresult
if [ -e /etc/xinetd.d/rsync ];then
    (echo "[*] 系统守护进程:" && more /etc/xinetd.d/rsync | grep -v "^#") | $saveresult
else
    echo "[*] 未发现守护进程" | $saveresult
fi
printf "\n" | $saveresult
 
 
echo ------------9. 运行服务 ----------------------
echo "[9.1] 正在检查运行服务....." | $saveresult
services=$(systemctl | grep -E "\.service.*running" | awk -F. '{print $1}')
if [ -n "$services" ];then
    (echo "[*] 以下服务正在运行：" && echo "$services") | $saveresult
else
    echo "[!!!] 未发现正在运行的服务！" | $saveresult
fi
printf "\n" | $saveresult
 
 
echo -------------4. 启动项 -----------------------
echo -------------4.1 用户自定义启动项 -----------------------
echo "[4.1] 正在检查用户自定义启动项....." | $saveresult
chkconfig=$(chkconfig --list | grep -E ":on| 启用" | awk '{print $1}')
if [ -n "$chkconfig" ];then
    (echo "[*] 用户自定义启动项:" && echo "$chkconfig") | $saveresult
else
    echo "[!!!] 未发现用户自定义启动项" | $saveresult
fi
printf "\n" | $saveresult
 
echo -------------4.2 系统自启动项 -----------------------
echo "[4.2] 正在检查系统自启动项....." | $saveresult
systemchkconfig=$(systemctl list-unit-files | grep enabled | awk '{print $1}')
if [ -n "$systemchkconfig" ];then
    (echo "[*] 系统自启动项如下:" && echo "$systemchkconfig")  | $saveresult
else
    echo "[*] 未发现系统自启动项" | $saveresult
fi
printf "\n" | $saveresult
 
echo -------------4.3 危险启动项 -----------------------
echo "[4.3] 正在检查危险启动项....." | $saveresult
dangerstarup=$(chkconfig --list | grep -E ":on| 启用" | awk '{print $1}' | grep -E "\.(sh|per|py)$")
if [ -n "$dangerstarup" ];then
    (echo "[!!!] 发现危险启动项:" && echo "$dangerstarup") | tee -a $danger_file | $saveresult
else
    echo "[*] 未发现危险启动项" | $saveresult
fi
printf "\n" | $saveresult
 
echo ------------5. 查看定时任务 -------------------
echo ------------5.1 系统定时任务分析 -------------------
echo ------------5.1.1 查看系统定时任务 -------------------
echo "[5.1.1] 正在分析系统定时任务....." | $saveresult
syscrontab=$(more /etc/crontab | grep -v "# run-parts" | grep run-parts)
if [ -n "$syscrontab" ];then
    (echo "[!!!] 发现存在系统定时任务:" && more /etc/crontab ) | tee -a $danger_file | $saveresult
else
    echo "[*] 未发现系统定时任务" | $saveresult
fi
printf "\n" | $saveresult
 
# if [ $? -eq 0 ] 表示上面命令执行成功; 执行成功输出的是 0；失败非 0
#ifconfig  echo $? 返回 0，表示执行成功
# if [ $? != 0 ] 表示上面命令执行失败
 
echo ------------5.1.2 分析系统可疑定时任务 -------------------
echo "[5.1.2] 正在分析系统可疑任务....." | $saveresult
dangersyscron=$(egrep "((chmod|useradd|groupadd|chattr)|((wget|curl)*\.(sh|pl|py)$))"  /etc/cron*/* /var/spool/cron/*)
if [ $? -eq 0 ];then
    (echo "[!!!] 发现下面的定时任务可疑, 请注意！！！" && echo "$dangersyscron") | tee -a $danger_file | $saveresult
else
    echo "[*] 未发现可疑系统定时任务" | $saveresult
fi
printf "\n" | $saveresult
 
echo ------------5.2 分析用户定时任务 -------------------
echo ------------5.2.1 查看用户定时任务 -------------------
echo "[5.2.1] 正在查看用户定时任务....." | $saveresult
crontab=$(crontab -l)
if [ $? -eq 0 ];then
    (echo "[!!!] 发现用户定时任务如下:" && echo "$crontab") | $saveresult
else
    echo "[*] 未发现用户定时任务"  | $saveresult
fi
printf "\n" | $saveresult
 
echo ------------5.2.2 查看可疑用户定时任务 -------------------
echo "[5.2.2] 正在分析可疑用户定时任务....." | $saveresult
danger_crontab=$(crontab -l | egrep "((chmod|useradd|groupadd|chattr)|((wget|curl).*\.(sh|pl|py)))")
if [ $? -eq 0 ];then
    (echo "[!!!] 发现可疑定时任务, 请注意！！！" && echo "$danger_crontab") | tee -a $danger_file | $saveresult
else
    echo "[*] 未发现可疑定时任务" | $saveresult
fi
printf "\n" | $saveresult
 
 
 
 
echo ------------6 最近 24 小时内变动的文件 ---------------------
#查看最近 24 小时内有改变的文件
(find / -mtime 0 | grep -E "\.(py|sh|per|pl|php|asp|jsp)$") | tee -a $danger_file | $saveresult
printf "\n" | $saveresult
 
 
echo ------------7 日志分析 ------------------------------
echo ------------7.1 查看日志配置与打包 -------------------
echo ------------7.1.1 查看日志配置 ----------------------
echo "[7.1.1] 正在查看日志配置....." | $saveresult
logconf=$(more /etc/rsyslog.conf | egrep -v "#|^$")
if [ -n "$logconf" ];then
    (echo "[*] 日志配置如下:" && echo "$logconf") | $saveresult
else
    echo "[!!!] 未发现日志配置文件" | tee -a $danger_file | $saveresult
fi
printf "\n" | $saveresult
echo ------------7.1.2 日志是否存在 ---------------
echo "[7.1.2] 正在分析日志文件是否存在....." | $saveresult
logs=$(ls -l /var/log/)
if [ -n "$logs" ];then
    echo "[*] 日志文件存在" | $saveresult
else
    echo "[!!!] 日志文件不存在, 请分析是否被清除！" | tee -a $danger_file | $saveresult
fi
printf "\n" | $saveresult
echo ------------7.1.3 日志审核是否开启 ---------------
echo "[7.1.3] 正在分析日志审核是否开启....." | $saveresult
service auditd status | grep running
if [ $? -eq 0 ];then
    echo "[*] 系统日志审核功能已开启, 符合要求" | $saveresult
else
    echo "[!!!] 系统日志审核功能已关闭, 不符合要求, 建议开启日志审核。可使用以下命令开启:service auditd start" | tee -a $danger_file | $saveresult
fi
printf "\n" | $saveresult
echo ------------7.1.4 打包日志 ---------------
echo "[7.1.4] 正在打包日志......" | $saveresult
zip -r ${log_file}system_log.zip /var/log/
if [ $? -eq 0 ];then
    echo "[*] 日志打包成功" | $saveresult
else
    echo "[!!!] 日志打包失败, 请工人导出日志" | tee -a $danger_file | $saveresult
fi
printf "\n" | $saveresult
 
 
echo ------------7.3message 日志分析 ---------------
echo ------------7.3.1 传输文件 --------------------
#下面命令仅显示传输的文件名, 并会将相同文件名的去重
#more /var/log/message* | grep "ZMODEM:.*BPS" | awk -F '[]/]' '{print $0}' | sort | uniq
echo "[7.3.1] 正在检查传输文件....." | $saveresult
zmodem=$(more /var/log/message* | grep "ZMODEM:.*BPS")
if [ -n "$zmodem" ];then
    (echo "[!!!] 传输文件情况:" && echo "$zmodem") | tee -a $danger_file | $saveresult
else
    echo "[*] 日志中未发现传输文件" | $saveresult
fi
printf "\n" | $saveresult
 
 
echo ------------7.4cron 日志分析 ---------------
echo ------------7.4.1 定时下载 -----------------
echo "[7.4.1] 正在分析定时下载....." | $saveresult
cron_download=$(more /var/log/cron* | grep "wget|curl")
if [ -n "$cron_download" ];then
    (echo "[!!!] 定时下载情况:" && echo "$cron_download") | tee -a $danger_file | $saveresult
else
    echo "[*] 未发现定时下载情况" | $saveresult
fi
printf "\n" | $saveresult
 
echo ------------7.4.2 定时执行脚本 -----------------
echo "[7.4.2] 正在分析定时执行脚本....." | $saveresult
cron_shell=$(more /var/log/cron* | grep -E "\.py$|\.sh$|\.pl$") 
if [ -n "$cron_shell" ];then
    (echo "[!!!] 发现定时执行脚本:" && echo "$cron_download") | tee -a $danger_file | $saveresult
else
    echo "[*] 未发现定时下载脚本" | $saveresult
fi
printf "\n" | $saveresult
 
 
echo ------------8sshd 配置文件 --------------------
echo ------------8.1sshd 配置 ----------------------
echo "[13.5.1] 正在检查 sshd 配置....." | $saveresult
sshdconfig=$(more /etc/ssh/sshd_config | egrep -v "#|^$")
if [ -n "$sshdconfig" ];then
    (echo "[*]sshd 配置文件如下:" && echo "$sshdconfig") | $saveresult
else
    echo "[！] 未发现 sshd 配置文件" | $saveresult
fi
printf "\n" | $saveresult

通用基本信息.sh

#!/bin/bash
echo "Linux 安全检查与应急响应工具"
echo "Version:1.3"
echo "Author:Daily"
echo "Date:2020-11-11"
 
 
dos2unix buying.sh
date=$(date +%Y%m%d-%H%M%S)
 
ipadd=$(ifconfig -a | grep -w inet | grep -v 127.0.0.1 | awk 'NR==1{print $2}')
 
check_file="/tmp/buying_${ipadd}_${date}/check_file/"
danger_file="/tmp/buying_${ipadd}_${date}/danger_file.txt"
log_file="/tmp/buying_${ipadd}_${date}/log/"
rm -rf $check_file
rm -rf $danger_file
rm -rf log_file
mkdir /tmp/buying_${ipadd}_${date}/
echo "检查发现危险项, 请注意:" > ${danger_file}
mkdir $check_file
echo "" >> $danger_file
mkdir $log_file
cd $check_file
 
if [ $(whoami) != "root" ];then
    echo "安全检查必须使用 root 账号, 否则某些项无法检查"
    exit 1
fi
 
 
saveresult="tee -a checkresult.txt"
echo "[0.1] 正在检查 IP 地址....." && "$saveresult"
 
echo -------------0.IP 及版本 -------------------
echo -------------0.1IP 地址 -------------------
echo "[0.1] 正在检查 IP 地址....." | $saveresult
ip=$(ifconfig -a | grep -w inet | awk '{print $2}')
if [ -n "$ip" ];then
    (echo "[*] 本机 IP 地址信息:" && echo "$ip")  | $saveresult
else
    echo "[!!!] 本机未配置 IP 地址" | $saveresult
fi
printf "\n" | $saveresult
 
 
echo ------------ 1 查看登录用户 ------------------
echo "[10.1] 正在检查正在登录的用户....." | $saveresult
(echo "[*] 系统登录用户:" && who ) | $saveresult
printf "\n" | $saveresult
 
 
echo ------------ 2 查看用户信息 ------------------
echo "[11] 正在查看用户信息....." | $saveresult
echo "[*] 用户名: 口令: 用户标识号: 组标识号: 注释性描述: 主目录: 登录 Shell" | $saveresult
more /etc/passwd  | $saveresult
printf "\n" | $saveresult
 
 
echo ------------ 3 检查超级用户 ---------------------
#UID= 0 的为超级用户, 系统默认 root 的 UID 为 0
echo "[11.1] 正在检查是否存在超级用户....." | $saveresult
Superuser=`more /etc/passwd | egrep -v '^root|^#|^(\+:\*)?:0:0:::' | awk -F: '{if($3==0) print $1}'`
if [ -n "$Superuser" ];then
    echo "[!!!] 除 root 外发现超级用户:" | tee -a $danger_file | $saveresult
else
    echo "[*] 未发现超级用户" | $saveresult
fi
printf "\n" | $saveresult
 
 
 
echo ------------ 4 历史命令 --------------------------
echo "[12.1.1] 正在检查操作系统历史命令....." | $saveresult
history=$(more /root/.bash_history)
if [ -n "$history" ];then
    (echo "[*] 操作系统历史命令如下:" && echo "$history") | $saveresult
else
    echo "[!!!] 未发现历史命令, 请检查是否记录及已被清除" | $saveresult
fi
printf "\n" | $saveresult
 
 
echo ------------5. 进程分析 --------------------
echo ------------5.1 系统进程 --------------------
echo "正在检查进程....." | $saveresult
ps=$(ps -aux)
if [ -n "$ps" ];then
    (echo "[*] 系统进程如下:" && echo "$ps") | $saveresult
else
    echo "[*] 未发现系统进程" | $saveresult
fi
printf "\n" | $saveresult
 
echo "正在检查守护进程....." | $saveresult
if [ -e /etc/xinetd.d/rsync ];then
    (echo "[*] 系统守护进程:" && more /etc/xinetd.d/rsync | grep -v "^#") | $saveresult
else
    echo "[*] 未发现守护进程" | $saveresult
fi
printf "\n" | $saveresult
 
 
echo ------------9. 运行服务 ----------------------
echo "[9.1] 正在检查运行服务....." | $saveresult
services=$(systemctl | grep -E "\.service.*running" | awk -F. '{print $1}')
if [ -n "$services" ];then
    (echo "[*] 以下服务正在运行：" && echo "$services") | $saveresult
else
    echo "[!!!] 未发现正在运行的服务！" | $saveresult
fi
printf "\n" | $saveresult
 
 
echo ------------6CPU 分析 -----------------
echo ------------6.1CPU 情况 -----------------
echo "正在检查 CPU 相关信息....." | $saveresult
(echo "CPU 硬件信息如下:" && more /proc/cpuinfo) | $saveresult
(echo "CPU 使用情况如下:" && ps -aux | sort -nr -k 3 | awk  '{print $1,$2,$3,$NF}') | $saveresult
printf "\n" | $saveresult
echo ------------6.2.2 占用 CPU 前 5 进程 -----------------
echo "正在检查占用 CPU 前 5 资源的进程....." | $saveresult
(echo "占用 CPU 资源前 5 进程：" && ps -aux | sort -nr -k 3 | head -5)  | $saveresult
printf "\n" | $saveresult
echo ------------6.2.3 占用 CPU 较大进程 -----------------
echo "正在检查占用 CPU 较大的进程....." | $saveresult
pscpu=$(ps -aux | sort -nr -k 3 | head -5 | awk '{if($3>=20) print $0}')
if [ -n "$pscpu" ];then
    echo "[!!!] 以下进程占用的 CPU 超过 20%:" && echo "UID         PID   PPID  C STIME TTY          TIME CMD"
    echo "$pscpu" | tee -a 20.2.3_pscpu.txt | tee -a $danger_file | $saveresult
else
    echo "[*] 未发现进程占用资源超过 20%" | $saveresult
fi
printf "\n" | $saveresult
 
 
 
echo ------------7 日志分析 ------------------------------
echo ------------7.1 查看日志配置与打包 -------------------
echo ------------7.1.1 查看日志配置 ----------------------
echo "[7.1.1] 正在查看日志配置....." | $saveresult
logconf=$(more /etc/rsyslog.conf | egrep -v "#|^$")
if [ -n "$logconf" ];then
    (echo "[*] 日志配置如下:" && echo "$logconf") | $saveresult
else
    echo "[!!!] 未发现日志配置文件" | tee -a $danger_file | $saveresult
fi
printf "\n" | $saveresult
 
echo ------------7.1.2 日志是否存在 ---------------
echo "[7.1.2] 正在分析日志文件是否存在....." | $saveresult
logs=$(ls -l /var/log/)
if [ -n "$logs" ];then
    echo "[*] 日志文件存在" | $saveresult
else
    echo "[!!!] 日志文件不存在, 请分析是否被清除！" | tee -a $danger_file | $saveresult
fi
printf "\n" | $saveresult
 
echo ------------7.1.3 日志审核是否开启 ---------------
echo "[7.1.3] 正在分析日志审核是否开启....." | $saveresult
service auditd status | grep running
if [ $? -eq 0 ];then
    echo "[*] 系统日志审核功能已开启, 符合要求" | $saveresult
else
    echo "[!!!] 系统日志审核功能已关闭, 不符合要求, 建议开启日志审核。可使用以下命令开启:service auditd start" | tee -a $danger_file | $saveresult
fi
printf "\n" | $saveresult
 
echo ------------7.1.4 打包日志 ---------------
echo "[7.1.4] 正在打包日志......" | $saveresult
zip -r ${log_file}system_log.zip /var/log/
if [ $? -eq 0 ];then
    echo "[*] 日志打包成功" | $saveresult
else
    echo "[!!!] 日志打包失败, 请工人导出日志" | tee -a $danger_file | $saveresult
fi
printf "\n" | $saveresult
 
echo ------------7.2secure 日志分析 ---------------
echo ------------7.2.1 成功登录 --------------------
echo "[7.2.1] 正在检查日志中成功登录的情况....." | $saveresult
loginsuccess=$(more /var/log/secure* | grep "Accepted password" | awk '{print $1,$2,$3,$9,$11}')
if [ -n "$loginsuccess" ];then
    (echo "[*] 日志中分析到以下用户成功登录:" && echo "$loginsuccess")  | $saveresult
    (echo "[*] 登录成功的 IP 及次数如下：" && grep "Accepted" /var/log/secure* | awk '{print $11}' | sort -nr | uniq -c )  | $saveresult
    (echo "[*] 登录成功的用户及次数如下:" && grep "Accepted" /var/log/secure* | awk '{print $9}' | sort -nr | uniq -c )  | $saveresult
else
    echo "[*] 日志中未发现成功登录的情况" | $saveresult
fi
printf "\n" | $saveresult
 
echo ------------7.2.2 登录失败 --------------------
echo "[7.2.2] 存在检查日志中登录失败的情况....." | $saveresult
loginfailed=$(more /var/log/secure* | grep "Failed password" | awk '{print $1,$2,$3,$9,$11}')
if [ -n "$loginfailed" ];then
    (echo "[!!!] 日志中发现以下登录失败的情况:" && echo "$loginfailed") |  tee -a $danger_file  | $saveresult
    (echo "[!!!] 登录失败的 IP 及次数如下:" && grep "Failed password" /var/log/secure* | awk '{print $11}' | sort -nr | uniq -c)  | $saveresult
    (echo "[!!!] 登录失败的用户及次数如下:" && grep "Failed password" /var/log/secure* | awk '{print $9}' | sort -nr | uniq -c)  | $saveresult
else
    echo "[*] 日志中未发现登录失败的情况" | $saveresult
fi
printf "\n" | $saveresult
 
echo ------------7.2.3 本机登录情况 -----------------
echo "[7.2.3] 正在检查图本机登录情况....." | $saveresult
systemlogin=$(more /var/log/secure* | grep -E "sshd:session.*session opened" | awk '{print $1,$2,$3,$11}')
if [ -n "$systemlogin" ];then
    (echo "[*] 本机登录情况:" && echo "$systemlogin") | $saveresult
    (echo "[*] 本机登录账号及次数如下:" && more /var/log/secure* | grep -E "sshd:session.*session opened" | awk '{print $11}' | sort -nr | uniq -c) | $saveresult
else
    echo "[!!!] 未发现在本机登录退出情况, 请注意！！！" | $saveresult
fi
printf "\n" | $saveresult
 
echo ------------7.2.4 新增用户 -------------------
echo "[7.2.4] 正在检查新增用户....." | $saveresult
newusers=$(more /var/log/secure* | grep "new user"  | awk -F '[=,]' '{print $1,$2}' | awk '{print $1,$2,$3,$9}')
if [ -n "$newusers" ];then
    (echo "[!!!] 日志中发现新增用户:" && echo "$newusers") | tee -a $danger_file | $saveresult
    (echo "[*] 新增用户账号及次数如下:" && more /var/log/secure* | grep "new user" | awk '{print $8}' | awk -F '[=,]' '{print $2}' | sort | uniq -c) | $saveresult
else
    echo "[*] 日志中未发现新增加用户" | $saveresult
fi
printf "\n" | $saveresult
echo ------------7.2.5 新增用户组 -----------------
echo "[7.2.5] 正在检查新增用户组....." | $saveresult
newgoup=$(more /var/log/secure* | grep "new group"  | awk -F '[=,]' '{print $1,$2}' | awk '{print $1,$2,$3,$9}')
if [ -n "$newgoup" ];then
    (echo "[!!!] 日志中发现新增用户组:" && echo "$newgoup") | tee -a $danger_file | $saveresult
    (echo "[*] 新增用户组及次数如下:" && more /var/log/secure* | grep "new group" | awk '{print $8}' | awk -F '[=,]' '{print $2}' | sort | uniq -c) | $saveresult
else
    echo "[*] 日志中未发现新增加用户组" | $saveresult
fi
printf "\n" | $saveresult
 
echo ------------7.3message 日志分析 ---------------
echo ------------7.3.1 传输文件 --------------------
#下面命令仅显示传输的文件名, 并会将相同文件名的去重
#more /var/log/message* | grep "ZMODEM:.*BPS" | awk -F '[]/]' '{print $0}' | sort | uniq
echo "[7.3.1] 正在检查传输文件....." | $saveresult
zmodem=$(more /var/log/message* | grep "ZMODEM:.*BPS")
if [ -n "$zmodem" ];then
    (echo "[!!!] 传输文件情况:" && echo "$zmodem") | tee -a $danger_file | $saveresult
else
    echo "[*] 日志中未发现传输文件" | $saveresult
fi
printf "\n" | $saveresult
 
echo -----------7.4cron 日志分析 ---------------
echo ------------7.4.2 定时执行脚本 -----------------
echo "[7.4.2] 正在分析定时执行脚本....." | $saveresult
cron_shell=$(more /var/log/cron* | grep -E "\.py$|\.sh$|\.pl$") 
if [ -n "$cron_shell" ];then
    (echo "[!!!] 发现定时执行脚本:" && echo "$cron_download") | tee -a $danger_file | $saveresult
else
    echo "[*] 未发现定时下载脚本" | $saveresult
fi
printf "\n" | $saveresult
 
echo ------------7.5 btmp 日志分析 ----------------------
echo ------------7.5.1 错误登录日志分析 -----------------
echo "[7.5.1] 正在分析错误登录日志....." | $saveresult
lastb=$(lastb)
if [ -n "$lastb" ];then
    (echo "[*] 错误登录日志如下:" && echo "$lastb") | $saveresult
else
    echo "[*] 未发现错误登录日志" | $saveresult
fi
printf "\n" | $saveresult
 
echo ------------7.6 lastlog 日志分析 ----------------------
echo ------------7.6.1 所有用户最后一次登录日志分析 -----------------
echo "[7.6.1] 正在分析所有用户最后一次登录日志....." | $saveresult
lastlog=$(lastlog)
if [ -n "$lastlog" ];then
    (echo "[*] 所有用户最后一次登录日志如下:" && echo "$lastlog") | $saveresult
else
    echo "[*] 未发现所有用户最后一次登录日志" | $saveresult
fi
printf "\n" | $saveresult
 
echo ------------7.7 wtmp 日志分析 ---------------
echo ------------7.7.1 所有登录用户分析 -------
echo "[7.7.1] 正在检查历史上登录到本机的用户:" | $saveresult
lasts=$(last | grep pts | grep -vw :0)
if [ -n "$lasts" ];then
    (echo "[*] 历史上登录到本机的用户如下:" && echo "$lasts") | $saveresult
else
    echo "[*] 未发现历史上登录到本机的用户信息" | $saveresult
fi
printf "\n" | $saveresult
 
 
 
echo "检查结束！！！"

转载自: https://www.52pojie.cn/thread-1303373-1-1.html

正文完